Kit 10 - Tag 110 H160 LED 3K Grey anthracite RAL 7021

Tag is able to highlight architectural features while also lighting larger areas to guarantee safety and a bold lighting effect. The geometric and robust light fitting holds the glass that fits flush with the body, giving the product linearity and a clean design. Everything is supported on a directable joint. Adaptable to any context, even for outdoor installation.
As an accessory Tag has a ground post for use in the garden.

Tag is able to highlight architectural features while also lighting larger areas to guarantee safety and a bold lighting effect.
The geometric and robust light fitting holds the glass that fits flush with the body, giving the product linearity and a clean design. Everything is supported on a directable joint. Adaptable to any context, even for outdoor installation.
As an accessory, Tag has a ground post for use in the garden.

Suitable for indoor and outdoor use.
Die-cast aluminium body and joint; highly resistant to oxidation thanks to the zirconium based passivation treatment and the UV stabilized polyester resin coating.
Heat tempered and serigraphed glass diffuser.
Aluminium reflector.
Provided with 1m prewired power cable H05RN-F.
Silicone gaskets to maintain IP66 rating.
A4 stainless steel nuts and bolts.
180° angle adjustment.
TAG 110 with highly hygroscopic dehydrating bag.
No risk of photobiological damage, RG0 group (EN62471).

LED 4000K (N), 3000K (3) or 2700K (2). Integral ballast 220-240V.

Kit-10/11/12: consisting of Tag 110 + Bracket. Inaccessible device, provided with 1m of pre-wired power cable H05RN-F. No risk of photobiological damage, RG0 group (EN62471).
Kit-13/14/15: consisting of Tag210 + Bracket. Prearranged for double power input. Provided with 1m of pre-wired power cable H05RN-F. No photobiological risk under normal operating conditions, RG1 low risk group (EN62471).
Kit-16/17/18: consisting of asymmetric Tag 210 + Bracket. Prearranged for double power input. Provided with 1m of pre-wired power cable H05RN-F. No photobiological risk under normal operating conditions, RG1 low risk group (EN62471).

Also suitable for outdoor use. Die-cast aluminium Body and joint highly resistant to oxidation thanks to the zirconium based passivation treatment and the UV stabilized polyester resin coating. Heat tempered and serigraphed glass diffuser. Aluminium reflector. Silicone gaskets to maintain IP66 rating. A4 stainless steel nuts and bolts.
180° angle adjustment.
Possibility of installation Tag 110/210 on a post, height: 500 mm - 300 mm. - 160 mm., designed for wall or ceiling installation. Post made of extruded aluminium. Highly resistant to oxidization thanks to the zirconium based passivation process and the coating with UV-stabilised polyester resins. A4 stainless steel nuts and bolts.
Complete with fastening kit and stainless steel cable.

LED 4000K (N), 3000K (3) or 2700K (2). Integral ballast 220-240V.